BS EN 10300-2005 Steel tubes and fittings for onshore and offshore pipelines. Bitumen hot applied materials for external coating
|
ID： |
4A82726CEF944F13B89E9045C70F77E1 |
|
文件大小(MB)： |
0.34 |
|
页数： |
54 |
|
文件格式： |
|
|
日期： |
2010-8-10 |
|
购买： |
文本摘录（文本识别可能有误，但文件阅览显示及打印正常，pdf文件可进行文字搜索定位）：
BRITISH STANDARD BS EN,10300:2005,Steel tubes and fittings,for onshore and,offshore pipelines —,Bituminous hot applied,materials for external,coating,The European Standard EN 10300:2005 has the status of a,British Standard,ICS 23.040.99; 25.220.60; 75.180.10, , , ,BS EN 10300:2005,This British Standard was,published under the authority,of the Standards Policy and,Strategy Committee,on 29 December 2006,. BSI 2006,ISBN 0 580 49877 8,National foreword,This British Standard was published by BSI. It is the UK implementation of,EN 10300:2005. It supersedes BS 4147:1980 which is withdrawn.,The UK participation in its preparation was entrusted by Technical Committee,ISE/16, Protective coatings and linings of metal pipes and fittings, to,Subcommittee ISE/16/-/11, External coatings for steel tubes and fittings.,A list of organizations represented on ISE/16/-/11 can be obtained on request to,its secretary.,This publication does not purport to include all the necessary provisions of a,contract. Users are responsible for its correct application.,Compliance with a British Standard cannot confer immunity from,legal obligations.,Amendments issued since publication,Amd. No. Date Comments,EUROPEAN STANDARD,NORME EUROPéENNE,EUROP腎SCHE NORM,EN 10300,November 2005,ICS 23.040.99; 25.220.60; 75.180.10,English Version,Steel tubes and fittings for onshore and offshore pipelines -,Bituminous hot applied materials for external coating,Tubes en acier et raccords pour canalisations enterrées et,immergées - Revêtements externes au moyen de,matériaux hydrocarbonés,Stahlrohre und -formstücke für erd- und wasserverlegte,Rohrleitungen - Werksumhüllungen aus hei?,aufgebrachtem Bitumen,This European Standard was approved by CEN on 25 March 2005.,CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European,Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national,standards may be obtained on application to the Central Secretariat or to any CEN member.,This European Standard exists in three official versions (English, French, German). A version in any other language made by translation,under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official,versions.,CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,Slovenia, Spain, Sweden, Switzerland and United Kingdom.,EUROPEAN COMMITTEE FOR STANDARDIZATION,COMITé EUROPéEN DE NORMALISATION,EUROP腎SCHES KOMITEE FüR NORMUNG,Management Centre: rue de Stassart, 36 B-1050 Brussels,. 2005 CEN All rights of exploitation in any form and by any means reserved,worldwide for CEN national Members.,Ref. No. EN 10300:2005: E,EN 10300:2005 (E),2,Contents,Page,Foreword ..3,1 Scope.4,2 Normative references ..4,3 Terms and definitions..5,4 Composition of the coating6,5 Method of application .11,6 Inspection and testing..14,7 Repairs15,8 Marking ..15,9 Handling, transport and storage..16,Annex A (normative) Preparation of steel surfaces for the tests given in Annexes D, E, F and G..17,Annex B (normative) Priming of steel surfaces for the tests given in Annexes D, E, F and G ..18,Annex C (normative) Application of coating material for the tests given in Annexes D, E, F and G..19,Annex D (normative) Sag test 20,Annex E (normative) Impact test .21,Annex F (normative) Peel test..23,Annex G (normative) Bend test 26,Annex H (normative) Determination of volatile matter — Percent loss of mass.27,Annex I (normative) Cathodic disbonding test28,Annex J (informative) Guidelines for the use of coating materials.32,Annex K (normative) Determination of filler content by ignition .35,Annex L (normative) Determination of density at 25 °C.36,Annex M (normative) Determination of mass per area and loss of mass on ignition..38,Annex N (normative) Glass fabric — Tensile strength40,Annex O (normative) Determination of porosity 42,Annex P (normative) Use of hot applied bitumen tapes for coating steel components.43,Annex Q (informative) Recommended minimum quality control requirements for bituminous enamel,pipeline coatings..45,Annex R (normative) Holiday detection test .46,Annex S (normative) Field bond test.47,Annex T (normative) Inspection of coating thickness 49,Annex U (informative) Information to be supplied at t……
……